Gutter Extensions for Good Drainage
Gutter extensions – Procedure, A good drainage system makes the yard or garden by directing water from the dry and prevents it from recession. Therefore, it is important to have one on your property. Downspout drainage is one of the most important drainage systems. And downspout is the vertical length of the tube connected to the rain gutter attached to the ceiling.
The first step is to mark the area of land where they will install the Gutter extensions. After the basic design preparation, start digging in a marked area, starting from the point where the water comes from the original tube downspout. The depth must be of the trench about 10 inches, and the width of about 6 inches. Slope is assumed 1 to 2 inches down. Install downspout adapter and connections at the bottom of the tube using the postal screws. Make sure that the adapter is firmly in place. After that, put 90 elbow joints school in the trenches, so that it is positioned directly under the clutch.
Measure the length between 90 degree elbow joints and connections with a tape measure. PVC pipe cut the same measure with a hacksaw. Application of primer on both ends of the tube followed by cement and then joins each end of the pipe to the coupling and elbow joints, respectively. Cut another length of pipe to fit the length of the trench, and attach one end of the elbow joint with primer and cement. When you reach the end of the trench and the completion is installation process. Once this is done, fill the trench with sand and soil to hold the pipe in place. Make sure that the extension out to dry wells or rain barrel.
If you want to avoid puddles in your yard and save your home from damage to the foundation, then you should consider installing a drainage system on your property. It is especially for Gutter extensions.